EPE'19 ECCE EUROPE: TUTORIALS

All tutorials take place on Monday 2 September 2019.
 
Tutorials will take place at Albergo dei Poveri – University of Genova.
 
Morning sessions start 09:30, registration opens at 08:30
 
Afternoon session start 14:00, registration for afternoon tutorials opens at 13:00
 


TUTORIAL N° 1: GaN Transistors as an Enabler of High-Performance Power Electronics
(Morning)

  • Miroslav Vasic, Universidad Politécnica de Madrid, Centro de Electrónica Industrial (CEI), Madrid, Spain


TUTORIAL N°
2: Design of High efficiency Electric Motors and Power Electronic Drives with Wide Bandgap Devices (SiC and GaN)

(Afternoon
)

  • Prof. Bulent Sarlioglu, PhD, Associate Professor, University of Wisconsin-Madison, USA
  • Dr. Olayiwola Alatise, School of Engineering, University of Warwick, UK
  • Dr. José Ortiz Gonzalez, School of Engineering, University of Warwick, UK
  • Assist. Prof. Amir Sajjad Bahman, Department of Energy Technology, Aalborg University, Denmark
  • Prof. Francesco Iannuzzo, Department of Energy Technology, Aalborg University, Denmark


TUTORIAL N°
4: MMC-based Converters for MVDC Applications
(Full Day)

  • Prof. Drazen Dujic, Power Electronics Laboratory – PEL, Swiss Federal Institute of Technology – EPFL, Lausanne, Switzerland
  • Dr. Alexandre Christe, ABB Corporate Research Centre, Västeras, Sweden
  • Mr. Stefan Milovanovic, Power Electronics Laboratory – PEL, Swiss Federal Institute of Technology – EPFL, Lausanne, Switzerland
  • Daniel Stroe, Aalborg University, Denmark
  • Remus Teodorescu, Aalborg University, Denmark
  • Mattia Ricco, University of Bologna, Italy
  • Ilknur Colak, Team Leader & Project Manager – Power Electronics,  Maschinenfabrik Reinhausen GmbH, Regensburg, Germany


TUTORIAL N°
7:  Modular high frequency high voltage power supply: architectures, circuit modeling methodologies and output voltage sharing technologies
(Morning)

  • Saijun Mao, Leadrive Technology (Shanghai) Co. Ltd, Shanghai, China
  • Braham Ferreira, Delft University of Technology, Delft, The Netherlands


TUTORIAL N° 8: Model Predictive Control of Power Converters: Principle, Design and Applications
(Full Day
)

  • Ralph Kennel, Department of Electrical and Computer Engineering, Technical University of Munich, Munich, Germany
  • José Rodriguez, Faculty of Engineering, Universidad Andres Bello, Santiago, Chile
  • Tomislav Dragicevic, Department of Energy Technology, Aalborg University, Aalborg, Denmark
  • Mateja Novak, Department of Energy Technology, Aalborg University, Aalborg, Denmark
  • Tobias Geyer, ABB Corporate Research, Baden-Dättwil, Switzerland
Fermer le menu